 |
|||||||||
 |
 |
||||||||
 |
|||||||||
| UENSS Home | Equipment Operation | Receiver Instructions | |||||||||
Resources |
To change channels on the receiver:
1. - Press the black 'Main' button. |
||||||||
Switching
Instructions |
|||||||||
 |
2. Press F4 (Menu) 3. Press F3 (Program) 4. Press F2 (Prev) or F4 (Next) to move to the correct program |
||||||||
 |
OR Type in the program number using the numeric keyboard (ex: 110, 120, 130). Press the green 'Enter' key. Allow a few seconds for the program to change. |
||||||||
Problems With the Receiver: Note the status of the SIGNAL and ALARM lights on the upper right side of the receiver. The signal light should be on, the Alarm light off. If your receiver is not operating, or status lights show an alarm and/or no signal, call the satellite TOC at 435-797-0674. A TOC operator is on duty whenever classes are taking place, and will talk you through displaying settings and resetting the receiver if necessary. In most cases, the TOC will be able to assist you in resetting your receiver. If your receiver cannot be reset, the problem will be referred to an engineer. One last
word of warning: If you
need assistance in any way, please call the TOC: |
|||||||||
These
pages hosted by Utah State University |
|||||||||
 |
|
|
|
|
|
|
|
|
|
The
Magnitude SR-3200 Satellite Receiver tunes the broadcast classes on
the UENSS system, much like a home satellite receiver or cable set-top
box. The receiver tunes all 7 channels currently available to Distance
Education users. The receiver has a unique identifier number or "UA
number" which allows the receiver to be identified to the system
and allows the TOC to authorize the units' operation. 
